GENERAL CHARACTERISTICS OF CONVEYORED TEMPERING FURNACES
Energy Type
Natural Gas - LPG - Electric
Insulation
Combination of high temperature insulation bricks - Z block ceramic fiber - Rockwool - Ceraboard.
Control - Standard Features
Automatic.
Designed with 2 thermocouples. One for heat control, one for overheat.
System failures can be monitored by the warning lights located on the control panel.
PID temperature control system. (electric heating systems)
Silent and long lasting SSR system. (electric heating systems)
Control - Optional Features
Different programs can be entered via programming device.
Touch screen control panel.
PLC control system with touch screen panel.
Temperature detection and monitoring from different points in the furnace.
Process curves can be saved in a computer and print outs can be taken if needed.
Proportional burner control systems. (Natural Gas - LPG)
Belt speed can be adjusted via FC (frequency convertor).
Advantages
Custom designed furnaces according to your needs and expectations.
Our furnaces offer long service life as a result of their rigid design and high quality materials.
By using high quality insulation materials and adequate number of layers energy costs are decreased significantly.
Bemaktherm will keep supporting its customers in order to run their furnaces flawlessly.
Optional
Steel Belt Conveyor
Chain Conveyor
Cooling section
Multiple heating zones
MESH BELT CONVEYOR TEMPERING FURNACE-1
Usable Area
Width : 1500 mm x Length : 12000 mm x h : 400 mm
Energy Type
Natural Gas
Max. Temperature
450 °C
Control
Automatic - Programmable
MESH BELT CONVEYOR TEMPERING FURNACE-2
Usable Area
1000 X 12.000 X 300 mm
Energy Type
Natural Gas
Max. Temperature
500 °C
Control
Belt speed can be adjusted via the control panel.
Temperature control can be done separately via 4 zones.
Maximum temperature homogeneity is ensured with proportionally controlled burners and circulation fans.
There is a cooling tunnel at the exit of the oven that brings the products to ambient temperature.
TEMPERING FURNACE WITH CHAIN CONVEYOR-3
Usable Area
Width : 900 mm x Length : 7000 mm x h : 1200 mm
Energy Type
Electric
Max. Temperature
230 °C
Control
Automatic - PLC controlled
Operating Principle:
Products are loaded onto a chain conveyor in metal crates. The system operates in a step-wise manner: a new crate is loaded, the guillotine doors open, the chain conveyor advances by one step, and the guillotine doors close. A cooling tunnel is located at the end of the heating tunnel. Products exit the oven at a temperature safe for manual handling.
The system is controlled by a PLC. Parameters such as oven residence times, zone control temperatures, and crate positions can be monitored via the PLC display.
MESH BELT CONVEYOR TEMPERING FURNACE-4
Usable Area
Width : 800 mm x Length : 12000 mm x h : 250 mm
Energy Type
Natural Gas
Max. Temperature
650 °C
Control
Automatic - PLC controlled
MESH BELT CONVEYOR TEMPERING FURNACE-5
Usable Area
1250 X 13000 X 300 mm
Energy Type
Natural Gas
Max. Temperature
500 °C
Control
Belt speed can be adjusted via the control panel..
The system has been designed as a complete system with Steel Belt Conveyored Tempering Furnace and Roller Conveyored Annealing Furnace..
Temperature control can be done separately via 4 zones.
Furnace has a muffle and circulation system for maximum homogenity.
MESH BELT CONVEYOR TEMPERING FURNACE-6
Usable Area
500 X 3000 X 180 mm
Energy Type
Elektric
Max. Temperature
450 °C
Control
Automatic - Programmable
Belt speed can be adjusted via the control panel.
Temperature control can be done separately via 3 zones.
With PID control, each zone can be programmed by ± 5 ºC tolerance
CHAIN CONVEYORED TEMPERING FURNACE-7
Usable Area
900 X 4000 X 450 mm
Energy Type
Elektric
Max. Temperature
450 °C
Control
Automatic - Programmable
Furnace is chain conveyored.
Loading is done via metal boxes placed on the chain conveyor.
Furnace is composed of 3 heating sections that can be controlled separately.
With PID. control each section can be programmed with ± 5 ºC tolerance.
A cooling tunnel is designed after the heating section, to cool down the material to a hand-touchable temperature. Belt speed can be adjusted from the control panel.
MESH BELT CONVEYOR TEMPERING FURNACE WITH HEATING AND COOLING ZONES-8
Usable Area
1140 X 18.300 X 150 mm
Energy Type
Elektrik
Max. Temperature
250 °C
Control
Automatic - Programmable
Belt speed can be adjusted via the control panel.
Temperature control can be done separately via 3 zones.
All Rights Reserved
- 2026
Bemaktherm Industrial Furnaces and Plants
Cookie Preferences
We use necessary cookies for the website to function and, with your consent, analytics cookies to measure visitor traffic and website performance.
Cookie Policy
·
Privacy Notice
·
Explicit Consent
